Go Back   FlashFXP Forums > > > >

General Discuss anything and everything related to FlashFXP

 
 
Thread Tools Display Modes
Old 09-18-2002, 10:13 PM   #1
alankky
Junior Member
 
Join Date: Sep 2002
Posts: 3
Default It said "ABORT", please help.

I use Bulletproof server 2.15 at home, support FlashFXP has been clicked. I use ZoneAlarm Pro also at home.


My office installs LAN connection with broadband IP sharer.

Wile I use FlashFXP 1.43 Built 835 to upload file from my home to other FTP, it showed the following:


Microsoft wsock32.dll, ver2.2, 32bit of Apr 28 1998, at 19:33:24.
Connecting to My Site
Connected to cpa.no-ip.biz Port 21
220 BulletProof FTP Server v2.15
USER operator
331 Password required for operator.
PASS (hidden)
230 User Operator - Av logged in.
SYST
215 UNIX Type: L8
REST 100
350 REST supported. Ready to resume at byte offset 100.
REST 0
350 REST supported. Ready to resume at byte offset 0.
PWD
257 "/" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,44,4,155
200 Port command successful.
LIST
150 Opening data connection for directory list.
226 Transfer ok
Connecting to ugclub.cc
Connected to ugclub.cc Port 21
220 UnderGround FTP Server
USER alan
331 Password required for alan.
PASS (hidden)
230 User alan logged in.
SYST
215 UNIX Type: L8
REST 100
350 REST supported. Ready to resume at byte offset 100.
REST 0
350 REST supported. Ready to resume at byte offset 0.
PWD
257 "/" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,44,4,159
200 Port command successful.
LIST
150 Opening data connection for directory list.
226 Transfer ok
421 Connection timed-out !
Connection lost: ugclub.cc
Connecting to ugclub.cc
Connected to ugclub.cc Port 21
220 UnderGround FTP Server
USER alan
331 Password required for alan.
PASS (hidden)
230 User alan logged in.
SYST
215 UNIX Type: L8
REST 100
350 REST supported. Ready to resume at byte offset 100.
REST 0
350 REST supported. Ready to resume at byte offset 0.
CWD /
250 CWD command successful. "/" is current directory.
PWD
257 "/" is current directory.
List (cached)
List Complete.
CWD movie-XJ1
250 CWD command successful. "/movie-XJ1" is current directory.
PWD
257 "/movie-XJ1" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,44,4,168
200 Port command successful.
LIST
150 Opening data connection for directory list.
226 Transfer ok
CWD by Alan
250 CWD command successful. "/movie-XJ1/by Alan" is current directory.
PWD
257 "/movie-XJ1/by Alan" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,44,4,169
200 Port command successful.
LIST
150 Opening data connection for directory list.
226 Transfer ok
TYPE A
200 Type set to A.
TYPE A
200 Type set to A.
PASV
227 Entering Passive Mode (61,10,29,243,143,239).
PORT 61,10,29,243,143,239
200 Port command successful.
RETR ftp.txt
150 Opening data connection for ftp.txt (218 bytes).
STOR ftp.txt
425 Cannot open data connection (10061).
ABOR
226 ABOR command successful.
Transfer Failed!
TYPE A
200 Type set to A.
PORT 192,168,1,44,4,170
200 Port command successful.
LIST
150 Opening data connection for directory list.
226 Transfer ok
TYPE A
200 Type set to A.
PORT 192,168,1,44,4,171
200 Port command successful.
LIST
150 Opening data connection for directory list.
226 Transfer ok
Transfer queue completed
1 File failed to transfer


Please help...
alankky is offline  
Old 09-18-2002, 10:50 PM   #2
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

Based on your log I suspect your internet connection uses NAT (Network Address Translations).

In most cases you can not FXP with NAT. NAT provides a transparent protocol handler which insures the right IP is sent to the ftp server for PORT commands, however in doing so it breaks FXP. Most NAT designs will only monitor port 21 for the ftp protocol. So if the ftp server was on say port 2121 it would not be effected by NAT.

There are some previous theads where NAT was discussed and several users have made their own suggestions. Perhaps you should try searching the message board.
bigstar is offline  
Old 09-19-2002, 01:15 AM   #3
alankky
Junior Member
 
Join Date: Sep 2002
Posts: 3
Default

It seems I figured out the problem. It should be related to the location of FlashFXP client running.

I have tried FlashFXP at home with single broadband connection which transfered files from FTP Site(A) to Site(B), it is no problem occurred. However when I tried to do it gain in office which is under LAN connection, it failed as per the above log.

Therefore, I believe the location of FlashFXP client runing is relevant to the above problem.

My office uses broadband IP sharer. I have tried to host a server in the past but failed as I learned that I need to amend the setting in the sharer related to IP issue.

Please advise.
alankky is offline  
Old 09-19-2002, 02:49 AM   #4
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

A piece of hardware used at your office is using NAT more than likely it's the broadband IP sharer.
bigstar is offline  
Old 09-19-2002, 02:59 AM   #5
alankky
Junior Member
 
Join Date: Sep 2002
Posts: 3
Default

bigstar, so what u think I can resolve this issue ? Any test u suggest me to do now? have u have such experience ? I mean running FlashFXP in LAN and is successful..
alankky is offline  
 

Tags
200, directory, list, port, type

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 01:13 PM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)