Go Back   FlashFXP Forums > > > >

General Discuss anything and everything related to FlashFXP

 
 
Thread Tools Display Modes
Old 07-17-2002, 02:47 AM   #1
Waazaap
Junior Member
 
Join Date: Jul 2002
Posts: 5
Default Site to site FXPing problem

Hi,

I'm kinda new to FXPing but I got this:

- Windows NT stro (FXPable), wanna FXP to a Unix (non-FXPable)

I assume that I need to set the FXPable one to "uploading" and the non-FXPable to "downloading" right?
I'm not behind a firewall or a router. Just a hub.
OS is Windows XP Pro and I'm using FlashFXP 2.0 RC2 build 862.

The problem is that it looks like it is going to start, but it freezes at the STOR command.
It looks like this:

TYPE A
200 Type set to A.
PASV
227 Entering Passive Mode (193,219,146,68,12,41).
LIST -al
150 Opening ASCII mode data connection for file list
226 Transfer complete.
TYPE I
200 Type set to I.
PASV
227 Entering Passive Mode (210,121,128,12,11,129).
PORT 210,121,128,12,11,129
200 PORT command successful.
STOR kal-slam.002
550 kal-slam.002 : Overwrite permission denied
Transfer Failed!

I don't get it since I'm a FXPing n00b, please help!

TIA!
Waazaap is offline  
Old 07-17-2002, 03:46 AM   #2
MxxCon
Super Duper
FlashFXP Beta Tester
 
Join Date: Oct 2001
Location: Brooklyn, NY
Posts: 3,838
Default

550 kal-slam.002 : Overwrite permission denied
seems like you don't have permision to write to that dir. contact site admin and make sure all permisions are set correctly
MxxCon is offline  
Old 07-17-2002, 04:21 AM   #3
Waazaap
Junior Member
 
Join Date: Jul 2002
Posts: 5
Default

But do both FTP's have to be at PASV mode or just always one? And which one, the receiving FTP or the sending FTP?
Waazaap is offline  
Old 07-17-2002, 06:03 AM   #4
MxxCon
Super Duper
FlashFXP Beta Tester
 
Join Date: Oct 2001
Location: Brooklyn, NY
Posts: 3,838
Default

for fxp to work one site must be in pasv mode and one in regular (port). which one is depends on networking config. if both sites require that you connect using pasv mode, like firewalled servers, then fxp between them will not be possible.
MxxCon is offline  
Old 07-17-2002, 03:59 PM   #5
Waazaap
Junior Member
 
Join Date: Jul 2002
Posts: 5
Default

And how about the advanced settings, I mean the "uploading" and "downloading" tabs?
Waazaap is offline  
Old 07-17-2002, 05:47 PM   #6
floris
Member
FlashFXP Registered User
 
Join Date: Jul 2002
Posts: 65
Default

Uhm, am I nuts here or ...
in the first post he says, unix isn't fxpable, .. so why fxp with it?
floris is offline  
Old 07-19-2002, 05:10 AM   #7
Waazaap
Junior Member
 
Join Date: Jul 2002
Posts: 5
Default

Well cause the NT one is FXPable.

NT (FXPable) -> UNIX (non-FXPable) should work right?
Waazaap is offline  
Old 07-19-2002, 07:24 AM   #8
MxxCon
Super Duper
FlashFXP Beta Tester
 
Join Date: Oct 2001
Location: Brooklyn, NY
Posts: 3,838
Default

no
both sites must support fxp in order to work
MxxCon is offline  
Old 07-19-2002, 08:13 AM   #9
Waazaap
Junior Member
 
Join Date: Jul 2002
Posts: 5
Default

Thanks for helping me out dudes, I'm just an FXP n00b lol.
Just the last few questions:

NT -> UNIX and vice versa, both sites must be FXPable or do they both always have to be FXPable in order to FXP?
Because I have read multiple times that just 1 has to be FXPable in order to FXP..

And what do I need to do with the advanced options like "uploading" and "downloading"?

Thanks for helping me out!
Waazaap is offline  
Old 07-19-2002, 09:34 AM   #10
MxxCon
Super Duper
FlashFXP Beta Tester
 
Join Date: Oct 2001
Location: Brooklyn, NY
Posts: 3,838
Default

FXP works by simulating pasv upload/download on one site and "active" download/upload on the other.
in order for FXP to work sites must allow for PORT command to have ip other than the one used during login and must accept incoming data connections from ips other the one used during login.
it is possible for a site to allow only port w/ other ip OR incoming connecitons from other ip, however with most ftpd if FXP is disable, both of these "features" are disabled.

i don't want to sound like i'm brushing you off, but consider reading some ftp RFC's. there are not extremely complex and will let you understand what exactly is going on during ftp/fxp session.
MxxCon is offline  
Old 07-22-2002, 08:07 AM   #11
JuvY
Member
 
Join Date: Dec 2001
Posts: 47
Default

It all comes down to the network configuration, and the way each admin configured his FTP. As far as I know there is no sure way to know if 2 FTP's can perform FXPing but to try it yourself.
JuvY is offline  
 

Tags
200, fxping, mode, set, type

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FTP with xbox some file xfer some don't? Jaz97 General Discussion 8 10-23-2004 04:14 PM


All times are GMT -5. The time now is 04:12 PM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)