Sorry guess I read too quickly....
Using a crossover cable requires the following steps;
1) Set the Evox dashboard to static ip type.
2) Add ip address 192.168.1.2 to evox.
3) Set sub network mask as 255.255.255.0
4) Set gateway address to 192.168.1.3
5) Both DNS should be 0.0.0.0
6) Set your Nic card TCP/IP connection to IP addr 192.168.1.3.
7) Set the Sub Network Mask to 255.255.255.0
8) Set gateway address to 192.168.1.2
Leave DNS set to obtain automatically....
Try these steps and see what happens
Threaded Mode
