FXP and Windows ICS Problem

Makc666 · 09-09-2004, 10:20 AM

I have two LAN PCI Cards.
1st looks into Internet
2nd looks into my home LAN network.

On 1st LAN card I enabled Windows ICS (Internet Connection Sharing) for 2nd card.

1st card has IPs:
192.168.10.10
62.213.XXX.YYY
Gate:
62.213.XXX.1

2nd card IP is set automatically by Windows when enabling ICS to:
192.168.0.1
=======================================
The problem is that when I try to make FXP from one FTP to another FlashFXP locked on PORT command. It look like:
--------------------------------------------------------
[18:53:07] [R] List Complete: 847 bytes in 0,52 seconds (1,6 KB/s)
[18:53:09] [R] TYPE I
[18:53:09] [R] 200 Type set to I.
[18:53:09] [L] TYPE I
[18:53:09] [L] 200 Type set to I
[18:53:09] [R] PASV
[18:53:09] [R] 227 Entering Passive Mode (***,***,***,***,10,242)
[18:53:09] [L] PORT ***,***,***,***,10,242
[18:53:09] [L] 200 PORT command successful
[18:53:09] [L] STOR entrance-delta.mp3
--------------------------------------------------------

If I swich off ICS on 1st LAN card then FXP works OK!!!

I tried to set IP 62.213.XXX.YYY in FlashFXP options.
I also tried to use "http://iplookup.flashfxp.com"
Nothing! Only when I switch off ICS it works:
--------------------------------------------------------
[19:05:39] [R] List Complete: 847 bytes in 0,77 seconds (1,1 KB/s)
[19:05:39] [R] TYPE I
[19:05:39] [R] 200 Type set to I.
[19:05:39] [L] TYPE I
[19:05:39] [L] 200 Type set to I
[19:05:39] [R] PASV
[19:05:39] [R] 227 Entering Passive Mode (***,***,***,***,13,188)
[19:05:40] [L] PORT ***,***,***,***,13,188
[19:05:40] [L] 200 PORT command successful
[19:05:40] [L] STOR entrance-delta.mp3
[19:05:40] [L] 150 Opening BINARY mode data connection for entrance-delta.mp3
[19:05:40] [R] RETR entrance-delta.mp3
--------------------------------------------------------

I also tried to remove 192.168.10.10 IP from 1st card and left only main one. Nothing. Only when ICS is off...

Here is my problem