Queuing Files

[DawnG]

Originally Posted by MxxCon

DawnG, your log shows only 1 file transfer,

[09:01:59] [R] STOR favicon.ico
[09:01:59] [R] 150 Accepted data connection
[09:01:59] [R] 226-File successfully transferred
[09:01:59] [R] 226 0.091 seconds (measured here), 3.43 Kbytes per second
[09:01:59] Upload: favicon.ico 318 bytes in 0.09 second (0.3 KB/s)

and it uploaded correctly..
Please provide session logs when you actually encounter your problem. And please make sure that timestamps like above are turned on. Timing of commands is important to figure out what's going on.

Yes I only uploaded one file, but it took several tries for it to upload. Every folder I opened it stalled and would not bring up the list of contents...eventually I shut it down every time. Perhaps the only info in the log was the final and successful transfer.

Right now I am working on a new website and may not need to ftp much, but as soon as I can I will get right back to you on this.

Thank you

[bigstar]

From the log session log you posted I am not seeing any problems, as MxxCon pointed out we need to see the whole log or at least the part that shows the problem.

I would recommend increasing the session status window line limit under
Options > Preferences > General
and change it from the default of 300 to perhaps 5000 or more (20k is max)

Also if you double-click the session status window it will open a copy of the session log into the internal editor.
You'll want to wait until after the error or next success command.

[DawnG]

Originally Posted by bigstar

From the log session log you posted I am not seeing any problems, as MxxCon pointed out we need to see the whole log or at least the part that shows the problem.

I would recommend increasing the session status window line limit under
Options > Preferences > General
and change it from the default of 300 to perhaps 5000 or more (20k is max)

Also if you double-click the session status window it will open a copy of the session log into the internal editor.
You'll want to wait until after the error or next success command.

I did increase the line limit as you suggested....thank you for letting me know. As soon as I need to upload anything, which I am sure will be soon due to site building, I will do as you instructed. Will post it right back here....thanks again so much