Problems behind router

[RobertSmith]

Originally Posted by MxxCon

post session log

[R] Ansluter till 360 -> DNS=XXXX.myftp.org IP=83.XXX.XX.XXX PORT=55800
[R] Ansluten till 360
[R] 220 Gene6 FTP Server v3.8.0 (Build 34) ready...
[R] AUTH SSL
[R] 234 AUTH command ok; starting SSL connection.
[R] Ansluten. Handskakar SSL sessionen..
[R] SSL handskakning avklarad...
[R] SSL krypterad session med cipher AES256-SHA (256 bits)
[R] PBSZ 0
[R] 200 PBSZ=0
[R] USER XXXX
[R] 331 Password required for XXXX.
[R] PASS (hidden)
[R] 230 User XXXX logged in.
[R] SYST
[R] 215 UNIX Type: L8
[R] FEAT
[R] 211-Extensions supported:
[R] AUTH TLS
[R] CCC
[R] CLNT
[R] CPSV
[R] EPRT
[R] EPSV
[R] MDTM
[R] MFCT
[R] MFMT
[R] MLST type*;size*;create;modify*;
[R] MODE Z
[R] PASV
[R] PBSZ
[R] PROT
[R] REST STREAM
[R] SIZE
[R] SSCN
[R] TVFS
[R] UTF8
[R] XCRC "filename" SP EP
[R] XMD5 "filename" SP EP
[R] XSHA1 "filename" SP EP
[R] 211 End.
[R] CLNT FlashFXP 3.4.0.1145
[R] 200 Noted.
[R] CWD /
[R] 250 CWD command successful. "/" is current directory.
[R] PWD
[R] 257 "/" is current directory.
[R] TYPE A
[R] 200 Type set to A.
[R] MODE Z
[R] 200 Mode Z ok.
[R] PROT P
[R] 200 PROT command successful.
[R] PASV
[R] 501 PASV not allowed.
[R] Lyssnar på PORT: 2004, Väntar på anslutning.
[R] Begär IP Koll av http://iplookup.inicom.net
[R] Återvänt: 85.XXX.XX.XX
[R] PORT 85,XXX,XX,XX,7,212
[R] 200 Port command successful.
[R] LIST -al
[R] 425 Cannot open data connection.
[R] Listningsfel

[RobertSmith]

Eureka

Now it works, all i had to do was to put in the port range on the right TAB = Firewall TAB

Not the port for the site/server only the port range (same as in FlashFXP) se picture

It works without enable checkbox "force active mode to use this ip address"

http://img314.imageshack.us/img314/3161/bilduo7.jpg