Problems behind router

[RobertSmith]

Thx for your quick answers. Could it be so simple that this can't be done with my router D-LINK 624?

For other applications it is enough to do a port forward for only one port and that is done on "virtual server" se picture 1
http://img186.imageshack.us/img186/368/bild2hv6.jpg

I'm not sure if it is possible to forward a range of port, I have tried on "application" with no success
http://img241.imageshack.us/img241/4361/bild1vz9.jpg

This is my settings for options (F6)
http://img186.imageshack.us/my.php?image=bild3my2.jpg

These are the last rows from the status windows
[R] 200 PROT command successful.
[R] PASV
[R] 501 PASV not allowed.
[R] Lyssnar på PORT: 1027, Väntar på anslutning.
[R] PORT 192,168,0,100,4,3
[R] 200 Port command successful.
[R] LIST -al
[R] 425 Cannot open data connection.
[R] Listningsfel

[MxxCon]

Originally Posted by RobertSmith

Thx for your quick answers. Could it be so simple that this can't be done with my router D-LINK 624?

For other applications it is enough to do a port forward for only one port and that is done on "virtual server" se picture 1
http://img186.imageshack.us/img186/368/bild2hv6.jpg

this is incorrect. what you configured is you allowed people to connect to YOUR port 21..unless you are running a server, you should remove that.

I'm not sure if it is possible to forward a range of port, I have tried on "application" with no success
http://img241.imageshack.us/img241/4361/bild1vz9.jpg

this one looks more like what you need.. just change public port to 21...if sites you connect to use port 21, otherwise change it to whatever port they use

This is my settings for options (F6)
http://img186.imageshack.us/my.php?image=bild3my2.jpg

enable checkbox under those ports "force active mode to use this ip address" and either enter your internet ip or use flashfxp's ip autodetection.

[RobertSmith]

YOUR port 21..unless you are running a server, you should remove that.

I have a server installed (but not in use so i can uncheck port 21)

this one looks more like what you need.. just change public port to 21...if sites you connect to use port 21, otherwise change it to whatever port they use

The site i try to connect to use port 55800 so i changed the public port to 55800 (but i don't understand why i have spec. the other sites port here, i thought that was enough to do in flashFXP)

enable checkbox under those ports "force active mode to use this ip address" and either enter your internet ip or use flashfxp's ip autodetection.

i´m now useing http://iplookup.inicom.net (i have dynamic IP)


But sorry to tell, same problem