Go Back   FlashFXP Forums > > > >

Suggestions Post suggestions for upcoming versions

 
 
Thread Tools Display Modes
Old 11-06-2003, 04:22 PM   #1
Skyron
Junior Member
 
Join Date: Nov 2003
Posts: 20
Smile My Big Suggestion List - 60 points inside

Hello developers,

I'm posting here a big list of suggestions and a couple bugs I've compiled over time, but which I didn't post out of lazyness
Some of these points will have been addressed by other people before, but I didn't feel like searching the forum for each one - especially since you will probably know one immediately when you see it.
Some will make sense.
Some will not.
I just hope to contribute to an already great program

Most are small points btw. And I didn't seperate the couple bugs from the suggestions because it's often not clear to me when something is a bug, or an intended function.

I tested all on v2.2 build 935b.


Ok here goes:


1. on select all (CTRL+A), don't select "Parent Directory", even when it is already selected
2. always save site manager immediately (doesn't happen when disabling sites)
3. add the shift+right click function for remote files (to open with different viewer, do virus scan etc)
4. change the shift+right click function to ctrl or something? doesn't work now without a mouse (shift+shift+F10)
5. (inline) autocomplete in path box
6. remember directory history and fxp speed on reconnect or lose connect (esp. for when disconnected because of session timeout)
7. a queue with quick connect sites in it is useless when site has been removed from quick connect - which can happen often when using the standard quick connect history limit
8. when, after double clicking on parent directory, you double click on a directory other than the one you just left, enters the upmost directory of the two, because both get selected
9. add ability to select & move/disable multiple sites in manager simultaneously
10. add smooth scrolling when moving site in site manager, like in explorer (quite hard now if you have a big site list) - preferrably a little bit faster than explorer though
11. when double clicking on a .fqf file in explorer, flashfxp returns a "file not found" error when the path/filename contains spaces (needs quotes around %1 in registry)
12. add function to force current settings on all running sessions of flashfxp, so as not to lose them if you still have others running and you happen to close one of those before the current (only useful when SaveOnExit=1 of course). SaveOnExit should be in prefs imho btw, and so should QHistoryMax
13. queue entry fails if cwd != pwd --> happens for example when a virtual path mapping in Serv-U is changed to a link (which isn't a problem for the user, but it is for an existing queue entry)
14. when on installation you choose to save settings per user, then uninstall and set it to save shared, settings are still per user (maybe just because the user's settings dir isn't deleted when uninstalling?)
15. open/edit fails when a file in temp dir with the same name is in use
16. add function to not save settings for certain session (for when you need a completely different skiplist and behaviour for once, for example)
17. add function to change site to manual in queue for finishing queue on other pc (one that's on 24/7 for example)
18. add option to delete queue when non-temp queue file is loaded
19. entries in skiplist that start with ? don't work
20. ability to resize filters window (for long skip lists!)
21. add queue function to expand (optionally just the selected) queued dirs to make total transfer time correct (maybe just check the dirs one by one, optionally using recursive listing, to set their sizes in the queue - no need to display all the files then
22. add right clik - New File remotely (I would often use this for making .txt's and .bat's without having to search for a file to upload first)
23. remember proxy history, best would be a list of favorites, optionally dropdown list in toolbar for quick selecting, or at least aenable/disable button. Optionally add naming to proxy entries
24. set proxy & ident preference per site, in quick connect and site manager
25. only 1 temp queue is saved (might have something to do with SaveOnExit?) - happens when running 2 sessions, closing them both with queue entries left (only last one closed is saved as temp queue)
26. add Go To Target Dir in right click menu for queue entries
27. add Go To Target Dir Parent in right click menu for queue entries, for when directory doens't exist anymore, to see if it's been renamed (ok this is a bit silly)
28. F11 is missing in Help File shortcut list
29. add ALT+P for proxy tab in preferences
30. set ENTER in preferences to do "OK"
31. add auto scrolling in remote dir for moving files/folders (preferrably smooth scrolling too)
32. in site manager, don't open target group when you move a site (for when wanting to move a number of sites from 1 source group to different target groups)
33. in site manager, don't auto scroll to new location of moved site, stay where current "focus" is
34. in site manager, open group when holding site above it (to make moving to subgroups easier)
35. add function to reverse skiplist: skip all except... (for when wanting to download only txt's, nfo's for example) - goes with nr 16
36. add option not to refresh listing after making dir, renaming file etc (all with just one checkbox) - kinda makes working ftp's slower, especially with very slow or big listings
37. optional new column in local and remote listings: filetype. ability to sort by extension, recognize filetypes
38. search using recursive listing (can much faster in a lot of cases)
39. add "Back" button to toolbar. Back button on keyboard/mouse should do Back, Backspace is for Parent Dir
40. add option to turn off SYST and/or FEAT to speed up connect procedure (and to clean up the status window a bit when logging in )
41. add option to keep listing when connection lost (for when timeout on ftp is set to 1min or so, and you want to browse a big listing - can be VERY annoying)
42. queue entry fails if site is deleted from site manager/quick connect (solution: put site name as well as details in queue file, for when either gets changed/deleted)
43. add "execute locally" to remote .exe/.bat etc (should maybe need an ini setting to enable cause it's dangerous?)
44. adjust predicted transfer time when resuming (fxp) - flashfxp still things it's transferring the complete file
45. after deleting a file, a link in the listing doesn't show up as a link anymore, but as a regular folder (only tested with a Serv-U link)
46. when asked to overwrite, resume etc: alt+f4 should cancel, not skip
47. when asked to overwrite, resume etc: don't list after cancel
48. add function to add queue item manually
49. empty groups in Site Manager aren't saved - can be very annoying - would need a different way of writing sites.dat unfortunately, or at least an addition
50. ability to resize the left&right part of site manager, especially to create more room in the right hand side when site manager is full screen - especially useful for notes!
51. update filesizes in queue when actually transferring a file (SIZE command?). Cause files may be queud when still being uploaded, but transferred later
52. add resume exceptions (based on file extensions, ie. sfv usually gets screwed when resuming)
53. add copy command for custom commands, like in site manager
54. add checkbox to include current path in bookmark when saving a quick connect site - instead of the path used to connect with, if any (saves some trouble )
55. add ability to right click on queue entries in F11, see details, maybe even change them
56. add option not to close flashfxp/disconnect/shutdown etc when queue done but failed files remain - or maybe even to automatically set all failed entries to normal again, and try them 1 more time
57. add ability to add your own toolbars or buttons for functions
58. flash should still show target IP it's connecting to when connecting through proxy
59. when selecting files in queue is while transferring: list should remain focussed on same position when a directory is expanded
60. when selecting files in queue is while transferring: if the second file in selection is clicked right after a file transfer is started, the selection changes to exclude the first file (if selected from top to bottom) or include one file extra (if selected from bottom to top). To test this, make a big queue with files that are transferred in 2-3 seconds, then transfer the queue and make selections all the time
Skyron is offline  
Old 11-07-2003, 01:45 AM   #2
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

That's quite an extensive list. I don't have time to comment on every single item but here's a few.

1. this is by design, you cant perform any operation on the parent directory entry.

2. disabled sites are saved in the flashfxp.ini, i suspect this is due to using SaveOnExit.

12. SaveOnExit is not in the GUI due to unexpected issues when using it.

25. this is a side effect of using SaveOnExit and it's also one of the reasons we don't recommend it, there are some other issues with it as well.

37. this is possible via the right click menu, arrange icons > by type. The local folder has an optional type column, however currently the remote view does not (due to performance issues, it's really slow)

58. the proxy msg isn't being displayed properly, i've been meaning to fix it for some time.

Can you please explain smooth scrolling as stated in #10, the list should auto scroll during a drag/drop operation
bigstar is offline  
Old 11-07-2003, 03:56 AM   #3
Skyron
Junior Member
 
Join Date: Nov 2003
Posts: 20
Default

Thanks for the response bigstar, even if it's not on all of them

About the smooth scrolling: in windows explorer, when you hold a file/dir you're moving near the bottom of the folder list, it scrolls down. And it _keeps_ scrolling until you move your mouse up again. In FlashFXP site manager you need to keep "wiggling" your mouse around... on my system anyway.


1. But it does select it, and it does try to do a command on Parent Directory when selected! Also, if you do CTRL+A while Parent Directory is selected, then unselect a folder in the list, and then try to move everything to that folder, it doesn't work.

37. Indeed local view does, I've been using it for a long time... silly me . I guess I meant this for remote view only.

It would be very nice if SaveOnExit could be worked out btw, as you may have seen I use it a lot. Partly that's just a workaround for using multiple proxies at the same time, but I also use it for working with different "File Exists Rules" simultaneously, or retry intervals, NOOP, things like that - settings I want to make for that session, but not permanent for the site bookmark or my other sessions.
Skyron is offline  
Old 11-07-2003, 06:24 AM   #4
Skyron
Junior Member
 
Join Date: Nov 2003
Posts: 20
Default

Just thought of another suggestion for the list.. #61 I guess

I would definately like this: an option to automatically put files that will be skipped on top of the list, when a dir in the queue is expanded. So the expected transfer time is corrected.
Skyron is offline  
Old 05-25-2004, 08:56 PM   #5
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

19. Fixed -- ? was used for something else when it was the first character, this must of been a hack before we added ? support. (build 997)

44. According to the current code the the resume offset is taken into consideration.

46. Fixed (build 997)

51. File sizes should be updated.

61. If a file is to be skipped via the skiplist it shouldn't be added into the queue when the folder is expanded.

It would have been easier if your list was seperated into bug reports and suggestions but I can't be picky, that was quite a list.
bigstar is offline  
Old 05-26-2004, 04:38 AM   #6
Skyron
Junior Member
 
Join Date: Nov 2003
Posts: 20
Default

19. still not working for me (latest build). when I have a file test.txt and I add t?st.txt in skiplist, it works. ?est.txt doesn't work.

44. I guess I was a bit unclear the first time. I meant on fxp transfers. FlashFXP doesn't correct the transfer time on those.

46. It still skips here on alt+f4! Maybe my build isn't the latest then. It would be nice btw to have escape work in this dialog as well, to cancel.

51. Filesizes are only updated when the listing is refreshed before transferring it seems. If I queue a file that seems to be 20MB because someone is still uploading it, but transfer when he's done (then the file is say 60MB), FlashFXP will think I'm transferring a 20MB file (unless I refresh the dir listing before transferring) and set the expected transfer time accordingly.

61. Again I was unclear in my original post. I meant files that are skipped because of the File Exist Rules. Maybe make this an option though, as things like #51 may cause a file to be skipped because it seems to have a different size than it does when it's finally transferred.
Skyron is offline  
Old 05-26-2004, 07:05 AM   #7
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

No you didn't have the latest, I looked into these problems afterwards.

51. You do need to refresh the listing on a FXP transfers as FXP file transfers do not issue the SIZE command prior to each transfer. However this is probably something that should be changed. SIZE should probably always be sent.
bigstar is offline  
Old 06-02-2004, 05:16 PM   #8
Skyron
Junior Member
 
Join Date: Nov 2003
Posts: 20
Default

19 & 46 confirmed fixed.
Skyron is offline  
 

Tags
add, file, manager, queue, site


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:59 PM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)