Go Back   FlashFXP Forums > > > >

General Discuss anything and everything related to FlashFXP

 
 
Thread Tools Display Modes
Old 02-21-2004, 09:38 AM   #1
bnn121
Junior Member
 
Join Date: Feb 2004
Posts: 2
Default Using two Network Interface Cards

I'm running a evaulation version of Windows Server 2003. I have a registered version of FlashFXP 2.2 B-971.

I have two NIC cards in this box.

One nic card is connected to my linksys 8 port router for internal lan use.
The other NIC card is connected to my linksys 5 port switch. This I use for internet connections.

I have set the internet nic for TCP/IP only. disableing the networking protocols, because I dont want a path from my internet nic to my lan nic.

Now...I have my internal Lan nic set for networking only on my lan...I dont want it to have access to the internet...just the internal lan.

I relize this post is more towards netowrking setup...but my problem is...

I want Flash to use my internet NIC card only when I need to upload or download from the internet....and use my lan nic to transfer files between lan machines.

Is this even possible?

I hope somebody can steer me in some direction.

Thanks
bnn121 is offline  
Old 02-21-2004, 12:21 PM   #2
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

I'm not very familiar with how this is done, but if your network is configured properly it should do this automatically.

The network interface is selected based on your network routing table.
bigstar is offline  
Old 02-21-2004, 07:26 PM   #3
bnn121
Junior Member
 
Join Date: Feb 2004
Posts: 2
Default

I'm aware of the routing table...but I'm hoping I can get a few more idea's in this thread.


Is there not a way to bind a certain nic card to use just with flashFXP?

maybe in the ini file or a small batch or script file?
bnn121 is offline  
Old 02-21-2004, 08:09 PM   #4
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

The latest beta release of FlashFXP has an ini only setting that lets you force which network card is used, however this network interface is used for all connections. So it really wouldn't help you. Configuring your network routing is key.
bigstar is offline  
Old 02-29-2004, 12:01 PM   #5
wagons41
Junior Member
 
Join Date: Feb 2004
Posts: 2
Question

Quote:
Originally posted by bigstar
I'm not very familiar with how this is done, but if your network is configured properly it should do this automatically.

The network interface is selected based on your network routing table.
How do you set this up, my knowledge of networking is low.

i have one nic that goes to my router then the internet.
and one nic that i will be using a cross over cable to another pc.

i would like to tell flashfxp if the ip address to connect to is xxx.xxx.x.x then use this nic. if it anything else go the other way.

please could you help....
wagons41 is offline  
Old 02-29-2004, 12:39 PM   #6
bigstar
FlashFXP Developer
FlashFXP Administrator
ioFTPD Beta Tester
 
bigstar's Avatar
 
Join Date: Oct 2001
Posts: 8,012
Default

Please clairify, do you want just FlashFXP or all internet applications?

If you just want FlashFXP this isn't possible.

If you want all applications I'm afraid this is beyond my level of expertise.
bigstar is offline  
Old 02-29-2004, 04:14 PM   #7
wagons41
Junior Member
 
Join Date: Feb 2004
Posts: 2
Default

ok, thankyou any way
wagons41 is offline  
Old 03-02-2004, 04:29 AM   #8
MxxCon
Super Duper
FlashFXP Beta Tester
 
Join Date: Oct 2001
Location: Brooklyn, NY
Posts: 3,881
Default

Quote:
Originally posted by wagons41
i would like to tell flashfxp if the ip address to connect to is xxx.xxx.x.x then use this nic. if it anything else go the other way.
windows routing table will automaticly take care of it.
__________________
[Sig removed by Administrator: Signature can not exceed 20GB]
MxxCon is offline  
 

Tags
card, internal, internet, lan, nic

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
glftpd command set (import) (alternative) bigstar Custom Commands 9 03-08-2008 02:19 PM


All times are GMT -5. The time now is 05:12 AM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)