Go Back   FlashFXP Forums > > > >

General Discuss anything and everything related to FlashFXP

 
 
Thread Tools Display Modes
Old 02-08-2004, 11:42 PM   #1
Orange
Junior Member
 
Join Date: Feb 2004
Posts: 1
Question Queued Files Not Coming Through Correctly

FlashFXP ver 2.1, Registered. WinXP Pro SP1.
Behind Linksys Wireless Modem/Gateway.
Residential Gateway Hardware Version: 1.2b
Firmware Version: 2.9.4d

Here's the deal. I can queue up files for download, start the transfer and everthing is good. Once the first file completes I go from 300k per sec to about 10-25k per sec when the next queued file starts. I can abort transfer and restart, and I'm back up to 300k. Until the next file in queue starts and its back to 10-20k again. I however can go to a commercial site i.e., adobe, intel, and queue up some of their files and everything is good. Some other personal friend ftp's works also.

Below is what's going on with this ftp. Hopefully someone can help.

r/
Orange




List (cached)
List Complete.
TYPE I
200 Type set to I.
TYPE I
200 Type set to I.
PASV
227 Entering Passive Mode (213,113,163,96,7,206)
PORT 213,113,163,96,7,206
200 Port command successful.
STOR lndcso62.r03
150 Opening data connection for lndcso62.r03.
RETR lndcso62.r03
150 Opening BINARY mode data connection for lndcso62.r03.
226-Transfer complete.
226 [Free: 40283MB]-[Section: Default]-[Credits: 0.0M]-[Ratio: Unlimited]-[Speed: 178.2kb/s]
226 File received ok.
Transferred: lndcso62.r03 14.31 MB in 01:22 (177.96 KBps)
PASV
227 Entering Passive Mode (213,113,163,96,6,7)
PORT 213,113,163,96,6,7
200 Port command successful.
STOR lndcso62.r01 <---------- THIS FILE DROPPED TO 13K PSEC

150 Opening data connection for lndcso62.r01.
RETR lndcso62.r01
150 Opening BINARY mode data connection for lndcso62.r01.
ABOR
226 ABOR command successful.
ABOR
226 File received ok.
226 ABOR command successful.
Transfer Failed!
Transferred 1 file totaling 14.31 MB in 02:20 (177.96 KBps)
1 File failed to transfer
User Aborted
PASV
227 Entering Passive Mode (213,113,163,96,6,62)
PORT 213,113,163,96,6,62
200 Port command successful.
REST 721240
350 REST supported. Ready to resume at byte offset 721240.
STOR lndcso62.r01
150 Opening data connection for lndcso62.r01.
REST 721240
350 Restarting at 721240. Send STORE or RETRIEVE to initiate transfer.
RETR lndcso62.r01
150 Opening BINARY mode data connection for lndcso62.r01.
226-Transfer complete.
Orange is offline  
Old 02-09-2004, 04:50 PM   #2
MxxCon
Super Duper
FlashFXP Beta Tester
 
Join Date: Oct 2001
Location: Brooklyn, NY
Posts: 3,845
Default

what you neglected to mention is this is not regular download, but rather site-to-site tranfer.
during FXP(site-to-site), FlashFXP tell one site to connect to another and then await untill both sites say file transfer is ready.
FlashFXP has no control over how fast the transfer is going.
you'll have to figure out which site is slowing down after 1st file and then inform site's admin to correct that problem..
or it's possible that those 2 sites just don't like each other
__________________
[Sig removed by Administrator: Signature can not exceed 20GB]
MxxCon is offline  
 

Tags
200, file, lndcso62.r03, port, type

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
"Only resume files transferred in binary mode" Gary King General Discussion 1 03-31-2005 01:19 AM


All times are GMT -5. The time now is 03:20 PM.

Parts of this site powered by vBulletin Mods & Addons from DragonByte Technologies Ltd. (Details)