425- data connection error or list error.

[MissyL]

I can connect, but not get a list.

I can connect to others just fine and get a list.

So is error on my part or the server, i am trying to access?
And what do they have to do to make me get the list?

Missy

[MxxCon]

no help can be offered untill you read forum posting RULES
http://forum.flashfxp.com/showthread.php?s=&threadid=3078

[MissyL]

Version 2.1.924 trial.
windows xp
linksys routor.
I can connect to other ftp server, but one, which gives me the 425 error.
I also ran a server and people can connect to me.
Running cable internet.
Using only norton virus.
No firewall running.
ML

[MxxCon]

we still need to see connection log from flashfxp to see what exactly is going on:)

[MissyL]

WinSock 2.0
Connecting to New xxxxxxx for xxxxx
Connected to New xxxxxx for xxxxx -> xxxxxxxxxx PORT=xxxxxxx
220 xxxxxxx Software Paradise
USER missyl
331 Password required for xxxxxx.
PASS (hidden)
230 User xxxxxxx logged in.
SYST
215 UNIX Type: L8
REST 100
350 REST supported. Ready to resume at byte offset 100.
REST 0
350 REST supported. Ready to resume at byte offset 0.
PWD
257 "/D:/" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,2,4,91
200 Port command successful.
LIST -al
150 Opening data connection for directory list.
425 Cannot open data connection (10060).

ML

[MxxCon]

i assume that this site is NOT on port 21, but sites that do work are on port 21?
go to site manager and enable PASV mode
if that doesn't work, check out http://forum.flashfxp.com/showthread.php?s=&threadid=1110

[MissyL]

I did that and read the link.
Still get no list.
Log file the same as above.
I am trying to connect to someone, not run a server, i already have a server.
ML

[MxxCon]

yes, i'm well aware that you are trying to connect to a site and no run a server.
please paste status log after you applied the procedures in that are explained in that thread

[MissyL]

went you are talking about my internal ip. you do you mean wan
or the static ip, i set up on the computor.

ML

[MxxCon]

internal ip is 192.168.x.x.. one or as you put it "the static ip, set up on the computor."

[MissyL]

WinSock 2.0
Connecting to xxxxxxxxxxx
Connected to xxxxxxxxxxx -> IP=xxxxxxxxx PORT=12342
220xxxxxxxx Software Paradise
USER xxxxxx
331 Password required for xxxxx
PASS (hidden)
230 User xxxxxxx logged in.
SYST
215 UNIX Type: L8
REST 100
350 REST supported. Ready to resume at byte offset 100.
REST 0
350 REST supported. Ready to resume at byte offset 0.
PWD
257 "/D:/" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,2,4,0
200 Port command successful.
LIST
150 Opening data connection for directory list.
425 Cannot open data connection (10060).
List Error

I still can not connect, i put my 192.168.1.2 which is the ip of the computor, i am using.
I am not blanking out the port number i am trying to connect to.

ML

[Mr.Pink]

Couple of things u might want to double check

Make sure the XP Firewall is disabled

REF:Image1.gif

Port Forwarded in the linksys Router it has to be specific and tick both UDP and TCP when forwarding as it can make a differance


REF:Image2.gif
once done make sure your connection is set to PASSiVE Mode for the Account in FLashFXP as this will also help to filter through your router.

[MissyL]

No firewalls at all. unchecked in xp
Should i put the port number in the routor, i am trying to access.
Along with my internal ip?

ML

[MxxCon]

Originally posted by MissyL
I still can not connect, i put my 192.168.1.2 which is the ip of the computor, i am using.and that's the wrong ip you are entering...
you should enter your "WAN" ip, not "LAN" ip :)

[MissyL]

I did all that, and i still get the same log as above.
List error.
I contacted him several times, he says its my end.

I don't know what else to do.
Thanks for all the help.

ML

[Mr.Pink]

try connecting to 127.0.0.1

instead of 192.168.0.101

[MissyL]

That did.t work.
This is the ip i am trying to connect to 65.101.181.46
port 12342

MIssy

[Mr.Pink]

I am at a loss to what elese to suggest now to be totally honest.

[MxxCon]

we need to see status log when you enable PASV mode from site manager

[MissyL]

WinSock 2.0
Connecting to New Mauisun for staff
Connected to New Mauisun for staff -> IP=65.101.181.46 PORT=12342
220 Mauisun's Software Paradise
USER missyl
331 Password required for missyl.
PASS (hidden)
230 User missyl logged in.
SYST
215 UNIX Type: L8
REST 100
350 REST supported. Ready to resume at byte offset 100.
REST 0
350 REST supported. Ready to resume at byte offset 0.
PWD
257 "/D:/" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,2,4,47
200 Port command successful.
LIST
150 Opening data connection for directory list.
425 Cannot open data connection (10060).
List Error


Using site manger in passive mode.

Thanks guys, i appreicate your trouble and effort.
Missy