PB with listing any FTPsite

[neeeko]

* FlashFXP v[2].[1], build [924], [ ]registered, [X]unregistered, [ ]pirated
* OS [X] WinXP, [ ] Win2K, [ ] Win98, [ ] WinME, [ ] Other
* Running behind NAT/router [ ] Yes & Model [ ], [X] No, [ ] Not sure
* Running firewall [X] Yes, Name [XP firewall], Ver. [ ], or [ ] No
* Running Antivirus [ ] Yes, Name [ ] or [X] No
* Network [X] xDSL, [ ] CABLE, [ ] Dail-Up, [ ] Other

Typical Log :

WinSock 2.0
Connecting to [ Neeeko I ]
Connected to [ Neeeko I ] -> IP=213.228.0.66 PORT=21
220 ProFTPD 1.2.6 Server (ProFTPD: Serveur de mise a jour des pages sur perso.free.fr) [ftpperso1-a.free.fr]
USER neeeko
331 Password required for neeeko.
PASS (hidden)
230-User neeeko logged in.
230 Quotas on: using 23875914.00 of 104857600.00 bytes
SYST
215 UNIX Type: L8
REST 100
350 Restarting at 100. Send STORE or RETRIEVE to initiate transfer.
REST 0
350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer.
PWD
257 "/" is current directory.
TYPE A
200 Type set to A.
PASV
227 Entering Passive Mode (213,228,0,66,216,191).
LIST


And then u can see the bytes starting (or not) to increase "Loading Bytes"...but it never lists anything.
I would like to say that i use LeechFTP for the same FTPs and do not xperience the same pb (listing ok)...but it's so lame comparing to this one...

Any idea ? :rolleyes:

[MxxCon]

after LIST command, do you get reply from the server similar to this:

150 Opening ASCII mode data connection for file list
226 Transfer complete.
List Complete: 3,564 bytes in 0.66 (3.48 KBps)

can you paste status log from leechftp?

[neeeko]

OK here's the LeechFTP log :

~ Connecting...
~ Connected to ftpperso.free.fr, waiting for response...
< 220 ProFTPD 1.2.8 Server (ProFTPD: Serveur de mise a jour des pages sur perso.free.fr) [ftpperso1-2.free.fr]
> USER neeeko
< 331 Password required for neeeko.
> PASS *****
< 230-User neeeko logged in.
< 230 Vous vous etes connectes 151 fois, neeeko
> REST 1
< 350 Restarting at 1. Send STORE or RETRIEVE to initiate transfer
> REST 0
< 350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer
> SYST
< 215 UNIX Type: L8
> PWD
< 257 "/" is current directory.
~ Login completed.
> PORT 82,66,123,4,12,190
< 200 PORT command successful
> TYPE A
< 200 Type set to A
> LIST
< 150 Opening ASCII mode data connection for file list
< 226 Transfer complete.


And now for the FlashFXP log :

WinSock 2.0
Connecting to [ Neeeko I ]
Connected to [ Neeeko I ] -> IP=213.228.0.170 PORT=21
220 ProFTPD 1.2.8 Server (ProFTPD: Serveur de mise a jour des pages sur perso.free.fr) [ftpperso1-2.free.fr]
USER neeeko
331 Password required for neeeko.
PASS (hidden)
230-User neeeko logged in.
230 Vous vous etes connectes 152 fois, neeeko
SYST
215 UNIX Type: L8
REST 100
350 Restarting at 100. Send STORE or RETRIEVE to initiate transfer
REST 0
350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer
PWD
257 "/" is current directory.
TYPE A
200 Type set to A
PASV
227 Entering Passive Mode (213,228,0,170,217,87).
LIST

U c got no Opening stuff with Flash FXP, am totally lost...:confused:

[Linkster]

FlashFXP uses passive mode by default, which the server you are connecting to obviously doesn't support. Since PORT mode works with leechFTP, disable pasv in FlashFXP either globally or per site.

Options/Preferences/Proxy.Firewall.Ident/Use Passive Mode...thats the global setting. its also a site setting under the options tab.

Good luck.

[neeeko]

Passive Mode disabled : here's the result...worst !

WinSock 2.0
Connecting to [ Neeeko I ]
Connected to [ Neeeko I ] -> IP=213.228.0.170 PORT=21
220 ProFTPD 1.2.8 Server (ProFTPD: Serveur de mise a jour des pages sur perso.free.fr) [ftpperso1-2.free.fr]
USER neeeko
331 Password required for neeeko.
PASS (hidden)
230-User neeeko logged in.
230 Vous vous etes connectes 155 fois, neeeko
SYST
215 UNIX Type: L8
REST 100
350 Restarting at 100. Send STORE or RETRIEVE to initiate transfer
REST 0
350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer
PWD
257 "/" is current directory.
TYPE A
200 Type set to A
PORT 82,66,123,4,15,212

and then it hangs...:eek: :eek:

[Linkster]

hmm...not sure what to say. the only difference i can see is that leechftp is sending the PORT before the TYPE, and flashfxp is the other way around...I have a few proftpd sites, and flashfxp works flawlessly on them...bigstar?

[neeeko]

I experienced the same with local Serv-U FTP server....or BulletProof FTP servers....

So ther's nothing u can do right ? :(

[bigstar]

I dunno. I don't see a problem.

[MxxCon]

try to disable WinXP firewall and see if that makes any difference.
also try to reinstall FFXP to a new dir, you might have some settings messed up which you are overlooking..

[neeeko]

Well it didnt help reinstalling...Will leave it then...turning to another lame prog...
I love FlashFXP...especially because it recognizes my intellimouse explorer with the two buttons on the side to browse ftps and local folders...

But ok i have to abandon it...:mad:

[neeeko]

just wanted to add this...when flshfxp hangs with the "listing" at the bottom of the log window...i can view the content of the ftp by clicking on "view raw directory", does it help ?

[neeeko]

Found something else (yeah i wanna use FlashFXP :()...

When it says Listing in the status bar and when the window supposed to list the FTP folder remains blank.....

> right clicking on it and changing the way the icons are arranged (for example switching from "By Name" to "By Size") is revelaing the content !!! But its still stuck...and i'm only allowed to change this way once...then it's stuck...

Still no idea ?:eek: :(

[bigstar]

This is a real mystery to me.

The ftp server should reply "150 Opening ASCII mode data connection for file list"

[neeeko]

I give up !

http://www.imagestation.com/picture/sraid6/p90382f6d18d673a8f4a968092d7ce1bb/fe81583b.jpg

:confused: :(