won't send the next file on queues

[link]

I'm using flashfxp 2.0 build 908. flashfxp won't send the next file on queues.. after it's done with one file it just freezes and won't transfer the next file on queue.. here's my log..

p.s I'm using a linksys router

200 Type set to I.
PASV
227 Entering Passive Mode (167,142,192,133,16,184)
PORT 167,142,192,133,16,184
200 Port command successful.
STOR lds-gbdarlings-1.r05
150 Opening data connection for lds-gbdarlings-1.r05.
RETR lds-gbdarlings-1.r05
150 Opening BINARY mode data connection for lds-gbdarlings-1.r05 (15000000 bytes).
200 Command okay.
200 NOOP command successful.
200 Command okay.
200 NOOP command successful.
200 Command okay.
200 NOOP command successful.
200 NOOP command successful.
200 Command okay.
226 Transfer complete.
200 Command okay.
200 NOOP command successful

[bigstar]

turn off the "send noop during transfer" option and see if that helps.. This feature is not compatible with many ftp servers.


Also there is only one transfer complete message, there needs to be TWO.. one from each server.

[link]

i already turn it off on both side of the ftps and it's still not transfering the next file.

i just updated my flashfxp.. i'm using 2.1 924 now

[bigstar]

have you ever been able to fxp with flashfxp?

Are the ftp servers running on port 21?

[link]

yes i can fxp to certain sites but for a few sites i couldn't ..and for some i can't send next the file on queues.. the site where i'm sending to is using port 21 and the site i'm sending from is port 1666.. i also put a check on limit port range to 1024 - 2048 and bind sockets to ip. i fowarded those ports on my router

[bigstar]

linksys routers use NAT and NAT is not compatible with FXP, as a result you wont be able to properly fxp with the ftp server on port 21.

[rozwellite]

I am having the same problem. What I have noticed is that it only happens on slow transfers below 100KB. FXPs fine at higher speeds just the slower speeds have issues. If anyone has any ideas please let me know cause its gets really annoying queuing up files and then getting up in the morning and seeing that only one file transfered.

[link]

so i can use any port besides 21 right???i'm gonna try changing the ports and see what happens.. i'll post my results..

[MxxCon]

not you.
server admin will have to change his ftp from port 21 to something else

[link]

k..imma tell server admin to change ports... thanks for the help guyss