425 Can't build data connection: No route to host. and more...

[ferkel]

Hey fellas!


As the Subject ses, "425 Can't build data connection: No route to host." is my problem.

First of all, thx to the flashfxp develop team for including my suggestion of a variable Identd Port number to choice, this helped me to get Identd working througth the router!

Again I guess my router is again the problem, so after i connected a server nothing happens or that new error message occures!

Even if I turn off the router firewall and disable any special features flashfxp doesnt list (List -aL) files after i successfully connected.

SmartFTP, the ugly other, does, but why?

REST 0
350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer.
PWD
257 "/" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,235,7,46
200 PORT command successful.
LIST
...
than the client disconnects me cos of a time out and nothing is listed .. !

If anybody can help that might be great.

I already tried active/passive connecting and almost any of the connection/filelisting options, SmartFTP lists files even with List -aL without any delay of time.


... no clue, this got me stuck, ...i already tested an old flashfxp version but this doesnt do either ...and once a time ago it did? !

http://www.longshine.de/produkt/Router/883r-dsl-4f.htm

i guess a "WAN-to-LAN" or "LAN-to-WAN" setting is needed, but even if i turn off firewall it doesn work and SmartFTP does, with a enabled router firewall and a windows firewall!

...windows 2000 pro overhere;

:confused:

greetings ... and peace not war ;op

[MxxCon]

it's not a bug so
moved to correct forum

paste status log from smartftp and flashfxp to see differences

[ferkel]

50 Restarting at 100. Send STORE or RETRIEVE to initiate transfer.
REST 0
350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer.
PWD
257 "/" is current directory.
TYPE A
200 Type set to A.
Connecting IP Repeater "repeater.smartftp.com" ...
IP Repeater returned: "xxx.xxx.xxx.xxx"
PORT xxx,xxx,xxx,xxx,x,x
200 PORT command successful.
Opening data connection IP: xxx.xxx.xxx.xxx PORT: 1030.
LIST -aL
150 Opening ASCII mode data connection for directory listing.


btw, someone knows about that repeater.smartftp.com **** thing? damn SmartFTP but it lists files with LIST -aL,
...in ACTIVE MODE, passive doesnt work! ?(

hell

bye thx for help so far :)

[MxxCon]

go to preferences, Proxy/Firewall/Ident tab, check "Bind sockets to this address" and enter your ip there

[ferkel]

hey m8 :o

which one, i enterd my network IP the dhcp server of the router gave me, 192.168.1.235 but still nothing happens, ...

257 "/" is current directory.
TYPE A
200 Type set to A.
PORT 192,168,1,235,12,22
200 PORT command successful.
LIST
421 Timeout (58 seconds): closing control connection.



was that IP correct or the real/external ones or ?

thx so far!

[MxxCon]

not your local ip..your 'real/external one'

[ferkel]

THANKS A LOT IT WORKS! :o)

[ferkel]

...hey fella, i rebooted my system ...and now the same damn problem lol:


REST 0
350 Restarting at 0. Send STORE or RETRIEVE to initiate transfer.
PWD
257 "/" is current directory.
TYPE A
200 Type set to A.
PORT 2xx,xxx,xxx,xxx,6,71 <--- My adsl IP; [x] sockets..
200 PORT command successful.
LIST


nothing happens even if I enabled the [x] bind sockets to this IP (my dynamic adsl ones of course) ...

The connecting to a server works damn fast, less than a sec every connection/auth methods goes by ...but than LIST, and the time out!

I checked again my router and my local firewall, everything seems to be enabled ... I already tried with a diabled firewall and a clean system - nothing works so i bet its a problem with this damn router again.

so far,

greetings.

[Jesper]

I've seen this issue a couple times, in some cases, it is fixed by telling FFXP that site using NAT/Non routeable IP :)

[ferkel]

:o)

...yea, ok close that topic i did another setup of my system withou tthe router now;

...everything works, ...


thx guys 8)