Log in

View Full Version : FlashFXp probs with Router :(

fUN
12-19-2002, 12:41 PM
i have a Netgear RP614 and when i use flashfxp to flash something on Ftp i´ve probs ... i hope u can help me

TYPE I
200 Type set to I.
TYPE I
200 Type set to I.
PASV
227 Entering Passive Mode (**,+**,+*6,+3,5,1**)
PORT **,***,**6,*3,5,1**
200 PORT command successful.
STOR -500kb-
150 Opening BINARY mode data connection for -500kb-.
RETR -500kb-
425 Unable to open client data connection
ABOR
226 ABOR command successful.
Transfer Failed!
TYPE A
200 Type set to A.
PASV
227 Entering Passive Mode (**,***,**6,*3,5,1**)
LIST
150 Opening ASCII mode data connection for /bin/ls.
226 Transfer complete.
TYPE A
200 Type set to A.
PASV
227 Passive mode entered (**,***,**6,*3,5,1**)
LIST
125 Data connection already open; Transfer starting.
226 Transfer complete.
Transfer queue completed
1 File failed to transfer

i´ve cutted the Ip adress but this ftp server is flashable i´ve tryed with direct connection to Internet without Router and it runs ...

thx
MxxCon
12-19-2002, 05:49 PM
what do you mean by "i use flashfxp to flash something"
flash something?:confused:
what's your flashfxp build.
enable timestamping and debug prefixing. it's 1st command found here http://forum.flashfxp.com/showthread.php?s=&threadid=1218

and this not a "suggestion".
thread moved
fUN
12-19-2002, 06:29 PM
with FLASH i mean i transfer from FTP to FTP thats called flashing i think ? My build is FlashFxp 2.0 905 my OS : XP Pro

and this u mean ?

i´ve enable DebugTag=1 is this right ?

(1) TYPE I
(1) 200 Type set to I.
(2) TYPE I
(2) 200 Type set to I.
(1) PASV
(1) 227 Entering Passive Mode (154,105,155,25,9,154)
(2) PORT 154,105,155,25,9,154
(2) 200 PORT command successful.
(2) STOR -500kb-
(2) 150 Opening BINARY mode data connection for -500kb-.
(1) RETR -500kb-
(2) 425 Unable to open client data connection
(1) ABOR
(1) 226 ABOR command successful.
Transfer Failed!
(1) TYPE A
(1) 200 Type set to A.
(1) PASV
(1) 227 Entering Passive Mode (154,105,155,25,9,154)
(1) LIST
(1) 150 Opening ASCII mode data connection for /bin/ls.
(1) 226 Transfer complete.
(2) TYPE A
(2) 200 Type set to A.
(2) PASV
(2) 227 Passive mode entered (62,67,43,141,65,182)
(2) LIST
(2) 125 Data connection already open; Transfer starting.
(2) 226 Transfer complete.
Transfer queue completed
1 File failed to transfer
bigstar
12-19-2002, 07:41 PM
It sounds like your router is NAT based and not FXP compatible.
Are the two sites you're trying to FXP with on port 21?
fUN
12-20-2002, 04:59 AM
no one has port 53248 and one Port 21
bigstar
12-20-2002, 07:18 AM
I suspect the problem is caused by the one ftp server on port 21.
fUN
12-20-2002, 11:55 AM
hmm this can be , when i Flash from other FTP with port 21 to them with 53248 it runs .... ??

bad english i know :)
MxxCon
12-20-2002, 03:06 PM
it's not "flash".
site to site transfer is called "fxp". File eXchange Protocol.
fUN
12-20-2002, 06:43 PM
ok ok ;) Fxp but what can i do ?
bigstar
12-20-2002, 07:09 PM
Well if you can fxp with other port 21 sites or other sites in general, obviously the problem isn't your router.

Must be the ftp server.
fUN
12-21-2002, 04:58 AM
no ... when i direct connect to Internet over DFÜ-Netzwerk without Router i can FXP to all Fxpable Ftps
bigstar
12-21-2002, 01:36 PM
Ok well then I don't know