Mja som jag räknade så kan man bara forwarda en 20 portar på D-link 604. o bara enskilda portar inga ranges (som jag har kommit på iaf.) Det finns nåt som heter Special applications
Quote:
Special Applications
Some applications require multiple connections, like Internet games, video conferencing, Internet telephony and others. These applications have difficulties working with NAT (Network Address Translation). Special Applications allows some of these applications to work. If you need to run applications that require multiple connections, specify the port normally associated with an application in the "Trigger Port" field, select the protocol type as TCP (Transmission Control Protocol) or UDP (User Datagram Protocol), then enter the public ports associated with the trigger port to open them for inbound traffic. At the bottom of the screen, there are already defined well-known special applications. To use them, click on the edit icon and enable the service.
Name :This is the name referencing the special application.
Trigger Port :This is the port used to trigger the application. It can be either a single port or a range of ports.
Trigger Type :This is the protocol used to trigger the special application.
Public Port :This is the port number on the WAN side that will be used to access the application. You may define a single port or a range of ports. You can use a comma to add multiple ports or port ranges.
Public Type :This is the protocol used for the special application.
If the mechanism of Special Applications fails to make an application work, try using DMZ host instead.
NOTE: At any time, only one PC can use each Special Application.
|
Jag har personligen inte lyckats få det hela o funka utan jag har manuelt lagt till en 13 portar (dom enda jag hade kvar.) o satt dem som ports i ioFTPD. Det funkar nu men bara hjälpligt.
Om nån har nån ideför en lösning så är ni välkommna att hojta till