Thread: 426 error
View Single Post
Old 01-03-2010, 02:39 PM  
ArtX
Senior Member
 
Join Date: Jan 2004
Posts: 301
Default

Quote:
Originally Posted by Yil View Post
I could be mistaken but I think you actually show the problem right there in the cut/pasted lines. You xxx'd out the external IP so I'm assuming it isn't the 192.168.0.1 shown just below it. Can you confirm that is the internal IP of the machine and not the router which often gets a .1 address?
The one i crossed out is my external ip address, 192.168.0.1 is internal, i can set it so that it shows external for both but then i cant connect

Quote:
Originally Posted by Yil View Post
If that is the case then you probably have a 'use site IP' or something option enabled in your FTP client. This may be required for things to work locally in your current configuration because not all routers forward internal packets using the external IP back to the internal one. Thus it appears you have no choice but to enable that option to get it to work.
]If you disable the 'site IP' option and directory listings, etc break then setup a 2nd site for testing and using the same login/pass/etc but don't enable the 'use site IP' option and try to use 'STAT -l' for listings, and also disable PASV mode transfers. When using active mode you'll be giving the server your own local address and it won't have any trouble connecting back to you. That should allow you to list files over the command channel, FXP using the external IP, and transfer locally using active mode which is all you need
I think i tried the setup you mention, but i will double check, might have to wait a day or so as im in bed with flu like symptoms - so the doctor says

Quote:
Originally Posted by Yil View Post
There are two reasons that setup might not work as you want. You aren't actually reporting your external IP correctly in the PASV replies which means HOST= needs updating, or the server doesn't have the ability to create outbound TCP connections because of a firewall. Both should be somewhat easy to verify aren't the case.
HOST = atm has my external ip address, is that correct ?

Quote:
Originally Posted by Yil View Post
Which FTP client are you using if that doesn't work? I'll see if I can get the exact client settings for you. Feel free to PM/FTP me a cut of the logfile from login to an attempted file transfer and the .ini file and I'll see what I can make of it.
FTP client is flashfxp, have tried it with 3.6 , 3.7x betas and the 4.x betas, i was wondering, because drftpd sends files from different machines, could this be the issuse? Either flash or ioFTPD is expecting a connection from the machine i originally connected to, but the information is comming from a different ftp ip?

As i say i will try what you suggested in a day or so, not feeling to good atm

edit: think i may have found something, i must be ill because i went looking at the system logs, everytime i get an error, i get these two alerts in the logs

Log Name: System
Source: Schannel
Date: 03/01/2010 20:28:18
Event ID: 36874
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: VashTheStampede
Description:
An TLS 1.0 connection request was received from a remote client application, but none of the cipher suites supported by the client application are supported by the server. The SSL connection request has failed.

and

Log Name: System
Source: Schannel
Date: 03/01/2010 20:28:18
Event ID: 36888
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: VashTheStampede
Description:
The following fatal alert was generated: 40. The internal error state is 1204.

i have verified that this happens when transfering as i matched the times of the errors to when i did test transfers

Last edited by ArtX; 01-03-2010 at 03:32 PM.
ArtX is offline   Reply With Quote