Speed problems when using bind

[Cribbe]

Here is my config.

[Any]
Bind = 192.168.0.3
Host = *****.dyndns.org
Ports = ****-****
Random = True
;Global_Inbound_Bandwidth = 0
;Global_Outbound_Bandwidth = 0
;Client_Inbound_Bandwidth = 0 [*registered version*]
;Client_Outbound_Bandwidth = 0 [*registered version*]


When I use this the transferspeed "LAN" goes down to around 250kb/s.
But when i remove Bind and change Host to 0.0.0.0 i get around 8mb/s.
And this speed slowdown does not affect a group calle siteop but all the other groups.

I know I could change the Host to 0.0.0.0 but then some connections from my friends won't work.

Could anyone solve this mistery ?

[Harm]

Because when you use bind, all connections go through your cable/dsl modem (i guess it's one of those to get ~250kbps).
When you don't use bind, all connections go through the lan bypassing the modem.

[Cribbe]

Well actually I have 10mbit internet. But how can i solve this problem with out losing the ability to let some of my friends connect?

[dasOp]

Search the board, this topic has come up lots of times.
The simple answer is to setup 2 services, one that binds to public ip and one that binds to internal ip, for your use.

[Cribbe]

Ok.

But me guestion is why it does not slowdown the siteop group ?

[eieregooie]

Dunno if this helps anyone, but I just had the same problem (speed was 1mbit, max upload capacity of the modem/line) and fixed it by forcing data transfers to PORT mode (data connection type "use port" in CuteFTP / turn off "passive" toggle in FlashFXP)